1500x900 Wetroom Shower Former  Easy To Fit Linear Wet Room Shower tray for Concrete and Timber Floors including linear drain Our Linear Wet Room Shower Former Shower Tray is used when installing a walk in shower area for a wet room. The shower tray provides a waterproof base and is extremely easy to install. All of our wet room shower formers come with the Trap and Stainless Steel grate Included Size: 1500 x 900 x 20mm Drain position:  Centred Contemporary Stainless Steel Grate and Trap Included Pre-laid to falls ( Note if cutting take the same cut from each side to maintain integrity of falls) Use on wooden or Concrete Floors Lightweight & Strong Quick and Easy to Install Use with our  Insulated tile backer boards  to install a completely waterproof wet room

6mm Heat Insulating & Waterproof Construction/Tilebacker Board Dukkaboard Insulated construction boards are a fantastic multi purpose tilebacker board. Dukkaboard insulated tile backer boards are constructed using extruded polystyrene core, glass fibre reinforcing mesh and a special, flexible, cement based mortar. The cement coating gives the board excellent impact strength and resistance making them ideal for use in construction environments. Dukkaboard Thermal backer boards are essential when fitting electric underfloor heating and make the under floor heating system far more effective and efficient. The boards are resistant to water making them ideal for use in areas subject to prolonged and/or permanent water immersion. Available in 1200x600 Boards - Coverage .72 sq mt

Prevent Tiles Cracking on Timber Floors - Use Aquaboard Cement Tile Backer Board                                              Prevent cracking when tiling onto timber floors! Aquaboard Tile backerboard is the essential cement tile backer board for kitchens, bathrooms, wetrooms etc. This cement based tile backerboard is the ideal solution for overboarding floorboards and chipboard, as well as stud and solid walls, prior to tiling. It is also ideal for problem surfaces such as brick and block walls. Until recently 15-18mm Marine Plywood would have been used however Aquaboard Tile backer board is a far superior solution and has the added advantage of only been 6mm thick.Use Aquaboard Cement Tile Backerboard as an insulating board for underfloor heating mats and as a base for wetrooms. We stand over our Aquaboard and Guarantee that it will not fail under normal conditions. It can be used in with our complete range of Flexible Tile Adhesives and Grouts as well as our Tanking System and is formulated specifically for use with our wetroom shower trays. Available Ex Stock - We Deliver Nationwide. Call our Dublin Showroom Today to Order.  

Buy Insulated Tile Backer Boards in Dublin Insulated Tile backer boards are ideal for waterproofing wet rooms, as insulation boards with underfloor heating systems and as dry lining and home insulation. Whether you are working with small or large tiles, for walls or floors, Insulated tile backer boards are the perfect way to create a great surface for tile covering in any space. At Tiles.ie we stock the lwidest range of Tile backerboards in Ireland   What are the Advantages of Insulated Tile Backer Boards? Tile backer boards are essential when installing underfloor heating or renovating your flooring or walls in your wet room or walk in shower for many reasons, Completely Waterproof: The boards are made from rigid extruded polystyrene with a bonded cementitious coating to both sides so you don?t ever have to worry about rotting, deformation or weakening. Compatibility: Tile backer board is compatible with all types of tile including porcelain, slate, marble, and stone tiles as well as underfloor heating. It can also be used for insulation and dry lining for solid walls in other rooms in your house. Also our Insulated Tile Backerboards are designed to work with our Insulated wetroom showerformers giving a seamless finish Weight Bearing and Adherence: Correctly fixed tile backer boards are able to hold substantially more weight than other traditional wall surfaces. Tile backer boards can hold over twice the weight of plaster, up to 60 Kg, which is great for tiling jobs using large format or heavy tiles. Sizes and Prices of Our Insulated Tile Backer Boards 1200x600x6mm €20.50  each ( Mainly Used for Overboarding) 1200x600x10mm €23.50  each ( Our Most Popular Board) 1200x600x12mm €24.50  each 1200x600x20mm €26.00 each Available for Next day Nationwide delivery - Call our Dublin Showrooms Today to order

900x900 Linear Wetroom Shower Former  Easy To Fit Wet Room Shower tray for Concrete and Timber Floors - Linear Drain Included at no Extra Cost! Our Wet Room Shower Former  Shower Tray  is used when installing a walk in shower area for a wet room. The shower tray provides a waterproof base and is extremely easy to install. All of our wet room shower formers come with the Trap and Stainless Steel grate Included Size : 900 x 900 x 20mm Drain position : Centered Contemporary Stainless Linear Steel Grate and Trap Included Pre-laid to falls ( Note if cutting take the same cut from each side to maintain integrity of falls) Use on wooden or Concrete Floors Lightweight & Strong Quick and Easy to Install Use with our  Insulated tile backer boards  to install a completely waterproof wet room

Schluter Kerdi Drain - Centre Drainage Schluter Kerdi Drain is the original floor drainage system for cetre point drainage. It provides secure connection for bonded waterproof connections in various grate and frame combinations and includes the complementary ranges Kerdi Collar and Kerdi Shower providing a fully integrated system for greater peace of mind. Download the Catalogue below to see the full range of colours, sizes and finishes or call or visit one of our Dublin Showrooms today!  

900x900 Wetroom Shower Former  Easy To Fit Wet Room Shower tray for Concrete and Timber Floors Our Wet Room Shower Former Shower Tray is used when installing a walk in shower area for a wet room. The shower tray provides a waterproof base and is extremely easy to install. All of our wet room shower formers come with the Trap and Stainless Steel grate Included Size: 900 x 900 x 20mm Drain position: Centre Drain Contemporary Stainless Steel Grate and Trap Included Pre-laid to falls ( Note if cutting take the same cut from each side to maintain integrity of falls) Use on wooden or Concrete Floors Lightweight & Strong Quick and Easy to Install Use with Dukkaboard  Insulated tile backer boards  to install a completely waterproof wet room

Upgrade Your Bathroom with our Fantastic Wet Room Shower Formers Our wet room showertray formers are the ultimate in easy to install, practical and affordable wet room solutions. Stylish and eco-friendly, our wetroom shower formers represent fantastic value as each former, whether a centre drain showerformer, an offset drain showerformer or a linear drain shower former include the drain at no extra cost! This makes them extremely popular with bathroom installers and DIY customers alike. Our wetroom showertray formers are highly adaptable and suitable for both wooden and concrete floor installations and can be used to form a complete wetroom with our  full range of cement boards. .                                     Our complete range of wet room shower formers are available for next day nationwide delivery ( If ordered before 12.00pm) in the formats below - Call one of our Dublin Showrooms now to order.    

Tanking Tape 10 metre Roll Self Adhesive Tanking Tape Dukkaboard Aqua 77 Tanking Tape creates an effective waterproof layer in wall corners, connections between the floor and wall, joints between panels, pipe or balustrade junctions, bathroom outlets etc. Dukkaboard Aqua 77 Tanking Tape is easy to use and provides fast covering, totally waterproof joints.

1200x1200 Wetroom Shower Former  Easy To Fit Wet Room Shower tray for Concrete and Timber Floors Our Wet Room Shower Former Shower Tray is used when installing a walk in shower area for a wet room. The shower tray provides a waterproof base and is extremely easy to install. All of our wet room shower formers come with the Trap and Stainless Steel grate Included Size: 1200 x 1200 x 20mm Drain position: Centre Drain Contemporary Stainless Steel Grate and Trap Included Pre-laid to falls ( Note if cutting take the same cut from each side to maintain integrity of falls) Use on wooden or Concrete Floors Lightweight & Strong Quick and Easy to Install Use with Dukkaboard  Insulated tile backer boards  to install a completely waterproof wet room

Schluter Kerdi Board - The Universal Substrate for Tiles Schluter Kerdi Board is the perfect covering. No Matter whether you work with mosaics or large format tiles, an absolutely level with straight and precise angled internal and external corners is essential for a perfect tile covering.... which tile installers can now easily create using Schluter Kerdi Board. This who assume responsibility and warranty for the tile covering also have to be responsible for the substrate. Developers contractors and architects should bear this in mind when contracting the work. For this purpose Schluter Kerdi Board offers the following properties Even, impact resistant and rigid Waterproof and Temperature resistant Reliable bonded waterproof Vapour Resistant Thermally Insulating Fleece webbing for easy anchoring in thin bed adhesive Quick and easy to Install Lightweight easy to handle and transport Contains no cement or fibreglass Dust free and easy to cut ( With a Stanley Knife) Printed grid lines for Precise cutting Suitable for use on any kind of backround or substrate Suitable for free standing partition walls/shelves, coverings and similar structures

1200x900 Wetroom Shower Former  Easy To Fit Linear Wet Room Shower tray for Concrete and Timber Floors including linear drain Our Linear Wet Room Shower Former Shower Tray is used when installing a walk in shower area for a wet room. The shower tray provides a waterproof base and is extremely easy to install. All of our wet room shower formers come with the Trap and Stainless Steel grate Included Size: 1200 x 900 x 20mm Drain position: 450mm Centred Contemporary Stainless Steel Grate and Trap Included Pre-laid to falls ( Note if cutting take the same cut from each side to maintain integrity of falls) Use on wooden or Concrete Floors Lightweight & Strong Quick and Easy to Install Use with our  Insulated tile backer boards  to install a completely waterproof wet room

20mm Heat Insulating & Waterproof Construction/Tile Backer Board Dukkaboard Insulated construction boards are a fantastic multi purpose tile backer board. Dukkaboard insulated tile backer boards are constructed using extruded polystyrene core, glass fibre reinforcing mesh and a special, flexible, cement based mortar. The cement coating gives the board excellent impact strength and resistance making them ideal for use in construction environments. Dukkaboard Thermal backer boards are essential when fitting electric underfloor heating and make the under floor heating system far more effective and efficient. The boards are resistant to water making them ideal for use in areas subject to prolonged and/or permanent water immersion. Available in 1200x600 Boards - Coverage .72 sq mt. Our 20mm Board is the same thickness as our wet room shower formers.

1200x800 Wetroom Shower Former  Easy To Fit Wet Room Shower tray for Concrete and Timber Floors Our Wet Room Shower Former  Shower Tray  is used when installing a walk in shower area for a wet room. The shower tray provides a waterproof base and is extremely easy to install. All of our wet room shower formers come with the Trap and Stainless Steel grate Included Size : 1200 x 800 x 20mm Drain position : 450mm From End Contemporary Stainless Steel Grate and Trap Included Pre-laid to falls ( Note if cutting take the same cut from each side to maintain integrity of falls) Use on wooden or Concrete Floors Lightweight & Strong Quick and Easy to Install Use with Dukkaboard  Insulated tile backer boards  to install a completely waterproof wet room

10mm Heat Insulating & Waterproof Construction/Tilebacker Board Dukkaboard Insulated construction boards are a fantastic multi purpose tile backer board. Dukkaboard insulated tile backer boards are constructed using extruded polystyrene core, glass fibre reinforcing mesh and a special, flexible, cement based mortar. The cement coating gives the board excellent impact strength and resistance making them ideal for use in construction environments. Dukkaboard Thermal backerboards are essential when fitting electric underfloor heating and make the underfloor heating system far more effective and efficient. The boards are resistant to water making them ideal for use in areas subject to prolonged and/or permanent water immersion. Available in 1200x600 Boards - Coverage .72 sq mt

1800x900 Wetroom Shower Former  Easy To Fit Wet Room Shower tray for Concrete and Timber Floors Our Wet Room Shower Former Shower Tray is used when installing a walk in shower area for a wet room. The shower tray provides a waterproof base and is extremely easy to install. All of our wet room shower formers come with the Trap and Stainless Steel grate Included Size: 1800 x 900 x 20mm Drain position: 450mm from End Contemporary Stainless Steel Grate and Trap Included Pre-laid to falls ( Note if cutting take the same cut from each side to maintain integrity of falls) Use on wooden or Concrete Floors Lightweight & Strong Quick and Easy to Install Use with Dukkaboard  Insulated tile backer boards  to install a completely waterproof wet room

1400x900 Wetroom Shower Former  Easy To Fit Wet Room Shower tray for Concrete and Timber Floors Our Wet Room Shower Former  Shower Tray  is used when installing a walk in shower area for a wet room. The shower tray provides a waterproof base and is extremely easy to install. All of our wet room shower formers come with the Trap and Stainless Steel grate Included Size : 1400 x 900 x 20mm Drain position : 450mm from End Contemporary Stainless Steel Grate and Trap Included Pre-laid to falls ( Note if cutting take the same cut from each side to maintain integrity of falls) Use on wooden or Concrete Floors Lightweight & Strong Quick and Easy to Install Use with Dukkaboard  Insulated tile backer boards  to install a completely waterproof wet room

Tile Backer Board Cement Backer Board for Overboarding Wooden or Concrete Floors Aquaboard is a cement based board which provides the perfect tiling surface, and avoids the risks associated with tiling onto plywood and plasterboard. 1200x600x6mm Aquaboard  Tile Backer Board 6mm Aquaboard is used for overboarding wooden or concrete floors instead of plywood, which is vulnerable to moisture. Provides a movement-free surface - no risk of cracked tiles. Raises levels by only 6mm, instead of using 18mm plywood. 6mm Aquaboard can also be used to overboard solid walls. Guaranteed for 25 years. Aquaboard can be fixed with either Tile Adhesive or Dukkaboard Extra Strength Adhesive and should be primed with Flexmaster Tile Primer or similar before tiling   Click for Our  Insulated Tile Backer Boards 

Avoid Leaks - Ensure Your Wet Area is Fully Sealed - Use Dukkaboard Tanking Kit - The Quality Tanking System Specifically designed to provide a watertight barrier to interior walls and floors behind your Tiles Dukkaboard Tanking Kit is a Quality Tanking System for wet rooms , showers, bathrooms, kitchens and areas that are regularly exposed to damp atmospheric conditions. Dukkaboard Tanking Kit is a great investment that can be easily applied to ensure that you avoid costly leaks behind your tiles which only become apparent when the damage is done. Dukkaboard Tanking Kit is a quality Tanking System that produces a barrier to moisture, flexible enough to accommodate slight movement or vibration.With a coverage of over 8 square metres Dukkaboard Tanking Kit is larger than most of the market meaning that one tanking kit will cover even a large shower area. We stand over our Dukkaboard Tanking Kit and Guarantee that it will not fail under normal conditions. It can be used in with our complete range of Flexible Tile Adhesives and Grouts as well as our cement boards and wetroom shower trays Easy to Apply The Dukkaboard Tanking Kit is Available Ex Stock for Nationwide Delivery .  Call one  our Dublin Showroom Today to Order this Tanking Kit for Next Day Nationwide Delivery

1200x1000 Wetroom Shower Former  Easy To Fit Wet Room Shower tray for Concrete and Timber Floors Our Wet Room Shower Former  Shower Tray  is used when installing a walk in shower area for a wet room. The shower tray provides a waterproof base and is extremely easy to install. All of our wet room shower formers come with the Trap and Stainless Steel grate Included Size : 1200 x 1000 x 20mm Drain position : 450mm From End Contemporary Stainless Steel Grate and Trap Included Pre-laid to falls ( Note if cutting take the same cut from each side to maintain integrity of falls) Use on wooden or Concrete Floors Lightweight & Strong Quick and Easy to Install Use with Dukkaboard  Insulated tile backer boards  to install a completely waterproof wet room

12mm Heat Insulating & Waterproof Construction/Tilebacker Board Dukkaboard Insulated construction boards are a fantastic multi purpose tilebacker board. Dukkaboard insulated tile backer boards are constructed using extruded polystyrene core, glass fibre reinforcing mesh and a special, flexible, cement based mortar. The cement coating gives the board excellent impact strength and resistance making them ideal for use in construction environments. Dukkaboard Thermal backer boards are essential when fitting electric underfloor heating and make the under floor heating system far more effective and efficient. The boards are resistant to water making them ideal for use in areas subject to prolonged and/or permanent water immersion. Available in 1200x600 Boards - Coverage .72 sq mt

1000x800 Wetroom Shower Former  Easy To Fit Wet Room Shower tray for Concrete and Timber Floors Our Wet Room Shower Former  Shower Tray  is used when installing a walk in shower area for a wet room. The shower tray provides a waterproof base and is extremely easy to install. All of our wet room shower formers come with the Trap and Stainless Steel grate Included Size : 1000 x 800 x 20mm Drain position : Centre Drain Contemporary Stainless Steel Grate and Trap Included Pre-laid to falls ( Note if cutting take the same cut from each side to maintain integrity of falls) Use on wooden or Concrete Floors Lightweight & Strong Quick and Easy to Install Use with Dukkaboard  Insulated tile backer boards  to install a completely waterproof wet room

Dukkaboard Tanking System Waterproofing Kit for Tanking areas exposed to damp/wet conditions Dukkaboard Tanking System is an advanced sealing system designed to give a waterproof coating for the protection of water sensitive backgrounds such as plaster and plasterboard. Dukkaboard Tanking Kit prepares and waterproofs the substrate in preparation for applying tiles.  The system produces a barrier to moisture.  The Tanking slurry is flexible and will accommodate light movement and/or vibration which may be expected under normal conditions of use. Dukkaboard tanking Kit is ideal for areas exposed to submerged, wet and damp conditions such as swimming pools, wet rooms and showers and is recommended for use with all of our wet room shower trays and our range of tile backer boards   and has a coverage of up to 10 square metres.

1200x900 Wetroom Shower Former  Easy To Fit Wet Room Shower tray for Concrete and Timber Floors Our Wet Room Shower Former  Shower Tray  is used when installing a walk in shower area for a wet room. The shower tray provides a waterproof base and is extremely easy to install. All of our wet room shower formers come with the Trap and Stainless Steel grate Included Size : 1200 x 900 x 20mm Drain position : 3 Different Drain Positions Contemporary Stainless Steel Grate and Trap Included Pre-laid to falls ( Note if cutting take the same cut from each side to maintain integrity of falls) Use on wooden or Concrete Floors Lightweight & Strong Quick and Easy to Install Use with Dukkaboard  Insulated tile backer boards  to install a completely waterproof wet room